products details

Home > Products >

Epoxy Curing Agent

Modified Cycloaliphatic Amine Curing Agent for Transparent Ornament Casting

All Category

Special Additives

Ms. Selina

sales@dahua-chemical.com

+86-13425711784

Contact Now

Modified Cycloaliphatic Amine Curing Agent for Transparent Ornament Casting

Brand Name:	DAHUA
Model Number:	DH-1618S
MOQ:	2000
Price:	4.55-5.35
Payment Terms:	T/T

Detail Information

Product Description

Detail Information

Place of Origin:

CHINA

Gardner Color:

Amine Value (mg KOH/g):

270 ± 20

Viscosity At 25 °C (mPa·s):

200-600

Active Hydrogen Equivalent Weight (AHEW):

Mixing Ratio With Reference Resin (EEW 190):

100 : 50

Density At 25 °C:

Highlight:

Transparent Ornament Casting Curing Agent

Modified Cycloaliphatic Amine Hardener

Water Clear Casting Epoxy Curing Agent

Product Description

Product Category

Modified Cycloaliphatic Amine Curing Agent

Product Applications

This curing agent is recommended for use with standard bisphenol-A epoxy resin (EEW 190) and low-viscosity epoxy resin. When combined with DH-1618S, the system is ideal for transparent casting applications, including ornaments and decorative products, glass coatings, transparent electronic encapsulation coatings, and solvent-free topcoats.

Product Performance

Excellent weather resistance, moisture resistance, and mechanical properties

Low color, low odor, and complete curing at low temperatures

High hardness and flexible curing conditions

Improved physical properties after heat curing

Product Data

Typical Properties

AppearanceColorless, transparent, clear liquid

Gardner Color≤ 2

Amine Value (mg KOH/g)270 ± 20

Viscosity at 25 °C (mPa·s)200-600

Active Hydrogen Equivalent Weight (AHEW)97

Mixing Ratio with Reference Resin (EEW 190)100 : 50

Density at 25 °C0.99

Glass Transition Temperature (Tg)68 °C

Gel Time, 100 g, with Reference Resin30-50 min

Hardness of 100 g cured mass (Shore D)80-85

2 mm thin film - Tack-free Time2-2.5 h

2 mm thin film - Full Cure Time16-24 h

0.2 mm coating film - Room Temperature12 h

0.2 mm coating film - Heated at 120 °C25-30

Notes

All above test data were obtained under laboratory conditions at 25 °C.

Keep the product tightly sealed in its original container. Crystallization may occur when stored below 0 °C. If crystallization occurs, heat the product to 25 °C until it becomes clear again.

The typical values shown above are obtained from standardized laboratory tests and represent the general performance of the product. They are provided for the buyer's reference only and should not be regarded as final specifications.

Tags:

Home ABOUT US Products News

Quick Contact

Address :

Building #1 Shengyue Zone ,No. 33 Shunye East Road, Xingtan Town, Shunde District, Foshan City, Guangdong, China

TEL:

86-13425711784

E-mail

sales@dahua-chemical.com

+8613425711784

Our Newsletter

Subscribe to our newsletter for discounts and more.

Liquid Epoxy Resin

Epoxy Curing Agent

Solid Epoxy Resin

Fumed Silica

Defoamer Additive

Dispersant Additive

Wetting Agent

Silicone Leveling Agent

Special Additives

Liquid Epoxy Resin

Epoxy Curing Agent

Solid Epoxy Resin

Fumed Silica

Defoamer Additive

Dispersant Additive

Wetting Agent

Silicone Leveling Agent

Special Additives

products details

Liquid Epoxy Resin

Epoxy Curing Agent

Solid Epoxy Resin

Fumed Silica

Defoamer Additive

Dispersant Additive

Wetting Agent

Silicone Leveling Agent

Special Additives

Modified Cycloaliphatic Amine Curing Agent for Transparent Ornament Casting

Transparent Ornament Casting Curing Agent

Modified Cycloaliphatic Amine Hardener

Water Clear Casting Epoxy Curing Agent

Product Category

Product Applications

Product Performance

Product Data

Notes

Liquid Epoxy Resin

Waterborne Epoxy Resin

Epoxy Resin Curing Agent